Jagung bukan hanya makanan favorit manusia tetapi jerami jagung juga merupakan pakan favorit untuk hewan dan ternak. Jadi, bagaimana cara memanen batang jagung menjadi silase yang disukai ternak? Selanjutnya, kami akan memperkenalkan mesin panen jerami kepada Anda.
The development of agricultural technology has given birth to many new agricultural types of machinery. The new corn stalk crushing and recycling machine is a piece of fully automatic suspended equipment that can harvest silage or yellow silage for livestock. The machine only just needs a person to drive a tractor to automatically realize the corn straw harvesting, feeding, cutting, and conveying. The supporting power is 60-90 horsepower. The stubble height is 8-15 cm, and the cutting length is 3-5 cm. It has low fuel consumption and high efficiency. It can harvest works 6-15 acres a day. It is an ideal machine for small and medium-sized breeding cattle companies.
Keunggulan Mesin Penghancur dan Daur Ulang Jerami Jagung
- Tahan lama: komponen struktur baja, pemilihan bahan yang kokoh dan andal, bantalan penyesuaian diri berdaya tinggi, umur layanan panjang.
- Cakupan aplikasi yang luas: Mesin ini cocok untuk memanen jagung berdiri atau yang jatuh, jerami padi, gandum, alfalfa, reed, jerami kapas, dan tanaman lain yang tegak. Jerami yang didaur ulang tidak terbatas oleh tingkat kekeringan atau kelembapan, dan juga dapat diproses untuk jerami basah. Menjamin kestabilan pembentukan pelepasan dan meningkatkan efisiensi kerja.
- Tempat kerja tidak terbatas: mesin ini mudah dipindahkan, juga dapat dipasang tetap untuk pengolahan atau produksi mobile, yang memudahkan produksi di lapangan.
Prinsip Kerja Mesin Pengolah Silase
The corn straw crusher and recycling machine was driven by tractors. When working, the output power of the tractor is transmitted to the work tool through the universal joint. The straw is cut, sucked, and crushed by the high-speed rotating blade, enters the conveying device under the combined action of centrifugal force and airflow, and is sent to the centrifugal thrower by the conveying device. The crushed straw is lifted and blown out by the throwing drum and dropped on the trailer for transport.
The crushed corn stalks are fed into the mesin penggulung silase and finally become pemotong rumput. The thickness, density, and number of layers of the film can be adjusted according to the requirements of crop conditions, transportation, and storage. The Mesin pengikat silase jagung can automatically and continuously operate, is convenient for transportation, storage, and deep processing, and is suitable for use in various farms, pastures, and households.
Mengapa Peternak Pembiakan Memilih Menggunakan Mesin Penghancur dan Daur Ulang Jerami
corn stalk crushing and recycling machine adopts axial-flow harvesting. This type of harvesting can carry out corn stalk green silage and corn stalk yellow silage. The harvest is not aligned, and the cutting surface width is about 2.3 meters, but the shortcomings of this type of corn straw harvester are also obvious. However, the price is cheaper. In addition, it is not easy to mix soil, weeds, and the like into the crushed corn straw during corn stalk silage. Therefore, the forage after harvest has high nutritional value, good palatability, and is favored by livestock.