The inspection before start-up includes mechanical filter, mechanical suspension beam, various components connected to the rice milling machine, etc. The detailed inspection contents are as follows: the filter suspension should be flat to ensure the vertical suspension of the boom, the tightness is uniform, and the wire rope is slack; The suspension beam should be stable; free tools, personnel or other objects above the screen body and the transmission steel cavity; the transmission part can be freely rotated, the bearing must be lubricated; check all bolts, screws, nuts are installed and tightened; all machine covers, The machine door and side seals must be tightened in the correct position and in accordance with the regulations; the feed tube is installed to remain relaxed and not to be distorted.
Before the start of the rice mill, it is necessary to check the correct connection of the electrical parts, and use the vibration table to determine the insulation strength to ensure no leakage, safe and reliable. The direction of rotation of the motor should meet the requirements. Bind the rubber and cable and fix it on the inside of the transmission frame with the drive clamp. When connecting the user, check the connection and fixing. The cable is worn from the hole harness to the beam. Connect the fixed cable to the seat according to the installed wire clamp. On the boom below the chair, then secure it along the motor cable until the boom is connected to the power cord.
사용 후 청소 부분은 주로 3개의 스크리닝 기계, 2개의 세탁기, 2개의 왁싱 기계, 1개의 선택기, 3개의 흡입 기계 및 3개의 자기 분리기를 사용하는 예비 청소 및 템퍼링의 4단계를 포함합니다. 폐기물 함량을 0.08% 이하로 줄이기 위한 2개의 정수기.
청소 부분의 일반적인 과정은 다음과 같습니다: 디스케일러 - 중력 집진기 - 밀 저장 진동기 - 자기 분리기 - 청소 기계 - 회전 체 - 중력 제습기 - 등급 자동 제습기 - 회전 체 기계 - 스프레이 워터 밀.