第五，移栽机出现堆积
In the process of feeding 水稻移栽机, if there is a phenomenon of accumulation of sputum at the cardia and failure to slide properly, it may be:
第一，由于水稻移栽机的夹爪磨损，爪端未对齐或分离，宽度过大或过窄，以及苗床土层过厚等因素，导致无法正确取苗。在这种情况下，应及时更换新夹爪或调整夹爪之间的距离，使其符合标准范围。
Second, because the rice transplanter is too tight or too low, the position of the rice transplanter should be readjusted. Finally, because the block is too dry, it should be sprinkled with a proper amount of water on the block to maintain its humidity.
第六，移栽机间歇性输送
During the 水稻移栽机, the 水稻移栽机 is prone to the intermittent or non-working phenomenon. The case where the rice transplanter intermittently works may be related to the weaker elastic force of the feeding cam return spring or the peach-shaped wheel return spring, thereby causing the feeding cam or the peach wheel to fail to return normally.
水稻移栽机不工作的原因较为复杂：一是桃形轮定位键损坏或缺失；二是送料轮和桃形轮卡住；最后，可能是凸轮线断裂或丢失。
排除方法是打开工作传动的盖子，拆下两个回弹弹簧，安装新的回弹弹簧。如果两个轮子相位不一致，可能是桃形轮和送料轮磨损引起的。此时，应拆除桃形轮或送料轮，用铁铲将工作面磨平；如果磨损严重，应更换；如果出现销或键现象，应更换新装置。