Dekortikator Kenaf is carried out at both ends:Break the tip of fresh flax bar by the feed hopper, pull the flax out from the hopper when feeding into the part at the base (close to the root) about 15cm in hand, and then turn the tip to strip the flax base. Feeding break and pulling the hemp out of the hopper are as follows
- batang rami segar harus sesuai saat memberi makan. Jumlah batang rami segar di tangan harus cukup untuk digenggam dengan baik.
- ketika memberi makan, sebarkan batang rami di tangan secara berdampingan dan jangan tumpang tindih.
- kecepatan pemberian makan harus membuat yang Dekortikator Kenaf pecahkan tulang rami dari batang dan kulit rami.
- tarik perlahan. Tarik keluar dengan kecepatan yang lambat dan harus sebaik mungkin konsisten, mengikis ujung kecepatan sedikit lambat.
Struktur dari Dekortikator Kenaf
According to the mechanical characteristics of ramie crop stalks,On the basis of the domestic and foreign research experience of Dekortikator Kenaf,By adopting the design scheme of transverse-feed mode, and the ramie stalks are fed continuously and uniformly transversely through the clamping device, the non-stop processing of ramie can be realized, which can greatly reduce the auxiliary working time and improve the efficiency of flax stripping.