기능 요약
자동 스크류 오일 프레스 기계 is a kind of efficient and energy-saving oil extraction equipment, which is widely used in small and medium-sized oil mills and family workshops with 20%-50% oil conversion rate.
Compared with the traditional oil extraction method, the oil yield of this equipment has been increased by 4% to 6%, and the energy consumption has been reduced by about 60%, which significantly improves the production efficiency and economic benefits.
This series of oil press is easy to operate, covers a small area, and is suitable for hot and cold pressing of various oil crops. It is suitable for more than 30 oilseed crops such as peanut, soybean, sesame, rapeseed, etc. The residual oil rate of dry cake is as low as 0.5%-3.5%, and the production capacity of the single machine covers from 15kg/h to 550kg/h.
According to different production requirements, a variety of models are available to choose from, such as 6YL-60, 6YL-70, 6YL-80, 6YL-100, 6YL-125, etc., to meet the diversified needs of users.
뜨거운 판매 스크류 오일 프레스 기계
자동 스크류 오일 프레스 기계는 진공 여과를 실현할 수 있습니다. 재료에 따라 온도를 다르게 설정할 수 있습니다.
손잡이를 회전시키면 사람들이 재료를 쥐는 데 필요한 압력을 조정할 수 있습니다. 압력에 따라 한 번에 짜내는 기름의 양도 다르고, 기름 케이크의 두께도 다릅니다.
스크류 착유기 적용재료
Our screw oil press machine is suitable for peanuts, flax, sesame, rapeseed, oil sunflower, cottonseed, soybean, walnut, pepper seed, tung seed, castor, almond, etc.
스크류 프레스 오일 추출의 구조
스크류 오일 프레스 기계의 구조에는 온도 조절기, 연기 배출구, 분말 분배 캐비닛, 급유 위치, 감속기, 모터, 공급 입구, 조정 섹션, 가열 요소, 오일 배출 부분, 프레스 부분, 진공 오일 필터 등이 포함됩니다.
스크류 오일 추출기의 작동 원리
스크류 오일 프레스 기계에서는 원료가 호퍼에서 프레스 챔버로 들어갑니다. 그런 다음 나사에 의해 안쪽으로 밀어 넣어 압착됩니다.
재료, 스크류 및 챔버 사이의 높은 압력과 마찰은 상대적인 움직임을 만들고 열을 발생시켜 오일 추출 과정을 돕습니다.
나사의 직경은 증가하고 피치는 감소하여 재료를 앞쪽과 바깥쪽으로 밀어냅니다. 마찰열은 단백질을 변성시키고, 가소성을 높이며, 점도를 낮추는 데 도움이 되므로 오일 수율이 향상되고 오일이 프레스의 틈을 통해 흘러나올 수 있습니다.
스크류 프레스 오일 프레서의 매개변수
| 모델 | 6YL-60 | 6YL-70 | 6YL-80 | 6YL-100 | 6YL-125 |
| 나사 직경(mm) | Φ55 | Φ65 | Φ80 | Φ100 | Φ125 |
| 나사 회전 속도(r/min) | 64 | 38 | 35 | 37 | 34 |
| 주전력(kw) | 2.2 | 3 | 4 | 7.5 | 15 |
| 진공펌프 동력(kw) | 0.75 | 0.75 | 0.55 | 0.75 | 0.75 |
| 난방력(kw) | 0.9 | 1.8 | 2.2 | 3 | 3.75 |
| 용량(kg/h) | 40-60 | 50-70 | 80-120 | 150-230 | 300-350 |
| 무게(kg) | 240 | 280 | 880 | 1100 | 1400 |
| 크기(mm) | 1200*480*1100 | 1400*500*1200 | 1700*110*1600 | 1900*1200*1300 | 2600*1300*2300 |
스크류 종자 추출 기계의 장점
- High oil yield: compared with the old equipment, the oil yield can be increased by 2-3 percentage points. For every 100 pounds of peanuts processed, an average of 2-6 pounds of oil can be produced.
- Energy saving and environmental protection: save 40% of electricity under the same output.
- Save labor and high efficiency: save 60% of labor under the same output, 1-2 people can operate.
- Wide range of application: one machine is multi-purpose, can press more than 30 kinds of oil crops (such as peanut, sesame, sunflower, cottonseed, soybean, etc.).
- Pure oil: the residue is filtered by vacuum, the oil quality is pure and conforms to the hygienic quarantine standard.
- Small floor space: the pressing workshop only needs 10-20 square meters to meet the production demand.
- Intelligent temperature control: an infrared temperature control system is adopted to automatically control the pressing temperature and moisture, the oil molecules are directly softened and activated, and the oil yield is greatly increased.
- High-efficiency filtration: adopting multi-stage precision filtration device to increase oil filtration pressure and crude oil temperature, the oil quality is purer and the filtration speed is fast.
스크류 오일 밀의 사용 지침
- Check the fasteners before use to make sure there is no looseness; manually turn the handle and pulley to make sure the operation is flexible and no abnormal noise.
- Fill the reducer with 30# oil. The machine must be reliably grounded before starting.
- Connect the machine to three-phase four-wire power supply, and the spindle should be rotated counterclockwise after the machine is turned on.
- Adjust the thermostat to 120°C-160°C (depending on the oil), turn on the heating switch of the main machine and preheat the machine.
- After installing the new machine, it needs to break-in for 4-8 hours: put in the dry oil cake from the hopper slowly, and press it back repeatedly to polish the pressing chamber.
- Keep the feeding material evenly, avoid breaking material or too much material, the machine is loaded normally, running smoothly, sound rhythmic.
- Before stopping the machine, stop feeding, put in a small amount of cake residue, wait until the residual material in the press chamber is discharged, and stop the machine after no more cake comes out of the cake outlet.
- After stopping the machine, turn out the adjusting screw clockwise for 1-3 turns, and finally disconnect the power supply.
Our factory produces other kinds of 기름 presses, such as hydraulic oil presses(오일 추출 기계 | 스크류 오일 착유기 | 유압 오일 밀). 관심이 있으시면 오른쪽 양식을 작성하여 원재료와 특정 요구 사항을 알려주십시오. 귀하의 착유 사업이 원활하게 운영될 수 있도록 올바른 추천을 해드리겠습니다.
