Kenaf decorticator is carried out at both ends:Break the tip of fresh flax bar by the feed hopper, pull the flax out from the hopper when feeding into the part at the base (close to the root) about 15cm in hand, and then turn the tip to strip the flax base. Feeding break and pulling the hemp out of the hopper are as follows
- Свежий стебель конопли должен быть уместен при кормлении. Свежий номер стебля льна в руках, чтобы можно было схватить подходящий.
- при кормлении разложите стебли конопли на руках рядом и не перекрещивайте.
- the feeding speed should make the Kenaf decorticator break the flax bone of the stalk and the flax skin.
- медленное вытягивание. Скорость вытягивания должна быть медленной и должна быть как можно более последовательной, слегка медленно очищая конец скорости.
Structure of Kenaf decorticator
According to the mechanical characteristics of ramie crop stalks,On the basis of the domestic and foreign research experience of Kenaf decorticator,By adopting the design scheme of transverse-feed mode, and the ramie stalks are fed continuously and uniformly transversely through the clamping device, the non-stop processing of ramie can be realized, which can greatly reduce the auxiliary working time and improve the efficiency of flax stripping.