4.7/5 - (27 голосов)

Почему все больше людей используют комбинированную машину для очистки арахиса

Peanuts have always been an economic crop with a large planting area, but before there was no Машина для очистки арахиса, the peanuts were peeled by hand and then processed. This is not only troublesome but also very inefficient, and the labor cost is also high. However, after the fully automated peanut sheller enters the market, it has replaced manual production, and its production efficiency is not comparable to that of manual labor, especially the large output peanut sheller machine.

комбинированная-машина-для-очистки-арахиса
комбинированная-машина-для-очистки-арахиса

The large output peanut sheller machine is mainly used for peanut shelling and kernel removal. It is a new type of equipment after continuous update and development. It can realize the separation of kernels and shells. It can also be flexibly adjusted according to the purpose of peanuts, so as to achieve a more ideal peeling. The shell effect can not only meet the needs of oil extraction but also can peel peanut seeds. The shell effect is perfect, which can meet the various needs of everyone.

Навыки использования крупной машины для очистки арахиса

Groundnut shelling machine has two functions: cleaning and shelling. To feed a large-out Машина для очистки арахиса, the peanuts and other impurities in the peanut must be removed in the cleaning machine part to avoid failure of the peanut sheller part during operation and reduce the peanut crushing rate.

Необходимо обеспечить равномерность резки, без колебаний, чтобы не повлиять на эффект очистки арахиса.

Control the kernel output of the large-output Машина для очистки арахиса. If there is a lot of peanut in the cleaning warehouse, it should be released quickly, and if there is less, it should be released slowly.

Не забудьте очистить экран после использования, чтобы избежать засорения, и подготовиться к следующему использованию.

экран машины для очистки арахиса
экран машины для очистки арахиса

Что следует делать после получения комбинированной машины для очистки арахиса?

First, you should assemble the large output peanut sheller machine. And secondly, let the Машина для очистки земляного ореха Idling. On the one hand, it is to see whether the комбинированный орехокол для арахиса can work normally, and on the other hand, it is also to discover problems in advance and solve them in time. Many customers think that this work is unnecessary and wastes time. They have time to peel a few kilograms of peanuts, and even if there is a problem, it can be found directly on the boot. In fact, it is not. If you put peanuts in, they will appear again. Faults, it is difficult to determine the location of the fault, and it is necessary to get the peanuts out of the combined peanut sheller to repair it. This delays more time and the key is troublesome.