Mahitaji ya usalama ya mashine ya kusaga mchele
1. As for Mashine ya kusaga mchele, the exposed transmission device must have a protective part with reliable strength and rigidity. The safety distance of the protective part must ensure that the operator’s fingertip cannot touch the transmission device. Most importantly, for a protective part, the vertical static load at 1200N (120 kg force) cannot occur cracks, bending deformation, etc.
2. Wakati kifaa cha kinga kina dirisha la mraba au la mviringo, upana wa dirisha “a” unapaswa kuzingatia mahitaji ya 4< an ≤ 8mm, na umbali wa usalama “b” kutoka kwa dirisha hadi kifaa cha usafirishaji unapaswa kuzingatia b≥15mm.
3. Wakati nyavu ya kifaa cha kinga ni shimo la mraba, urefu wa upande “a” wa shimo unapaswa kukidhi mahitaji ya 4< an ≤ 8mm, na umbali wa usalama “b” wa gridi hadi kifaa cha usafirishaji unapaswa kuwa b≥15mm.
Ufungaji wa mashine ya kusaga mchele
You should refer to the location of the Mashine ya kusaga mchele and the size of the pits listed in the installation diagram, and enough space should be left around the Kusaga mchele. The specific installation orientation can be determined according to the user’s house. The base of the body should be horizontal and the concrete should be cast on the ground (the thickness of the concrete floor is above 120 mm). Mshikaji wa mchele can be fixed with expansion screws.
Karibu kutuma uchunguzi wa kuuliza maswali zaidi, na tunafurahi kukuhudumia!