Tại sao ngày càng nhiều người sử dụng Máy vỏ lạc kết hợp hơn
Peanuts have always been an economic crop with a large planting area, but before there was no máy bóc vỏ đậu phộng, the peanuts were peeled by hand and then processed. This is not only troublesome but also very inefficient, and the labor cost is also high. However, after the fully automated peanut sheller enters the market, it has replaced manual production, and its production efficiency is not comparable to that of manual labor, especially the large output peanut sheller machine.
Máy large output peanut sheller machine is mainly used for peanut shelling and kernel removal. It is a new type of equipment after continuous update and development. It can realize the separation of kernels and shells. It can also be flexibly adjusted according to the purpose of peanuts, so as to achieve a more ideal peeling. The shell effect can not only meet the needs of oil extraction but also can peel peanut seeds. The shell effect is perfect, which can meet the various needs of everyone.
Kỹ năng sử dụng Máy bóc vỏ lạc công suất lớn
Groundnut shelling machine has two functions: cleaning and shelling. To feed a large-out máy bóc vỏ đậu phộng, the peanuts and other impurities in the peanut must be removed in the cleaning machine part to avoid failure of the peanut sheller part during operation and reduce the peanut crushing rate.
Cần đảm bảo cắt đều, không có dao động để không ảnh hưởng đến hiệu quả bóc vỏ đậu phộng.
Control the kernel output of the large-output máy bóc vỏ đậu phộng. If there is a lot of peanut in the cleaning warehouse, it should be released quickly, and if there is less, it should be released slowly.
Nhớ vệ sinh màn hình sau khi sử dụng để tránh tắc nghẽn, và chuẩn bị cho lần sử dụng tiếp theo.
Bạn nên làm gì sau khi nhận được máy vỏ lạc kết hợp?
First, you should assemble the large output peanut sheller machine. And secondly, let the máy bóc vỏ đậu phộng Idling. On the one hand, it is to see whether the Máy tách vỏ lạc kết hợp can work normally, and on the other hand, it is also to discover problems in advance and solve them in time. Many customers think that this work is unnecessary and wastes time. They have time to peel a few kilograms of peanuts, and even if there is a problem, it can be found directly on the boot. In fact, it is not. If you put peanuts in, they will appear again. Faults, it is difficult to determine the location of the fault, and it is necessary to get the peanuts out of the combined peanut sheller to repair it. This delays more time and the key is troublesome.