苎麻去皮机 is carried out at both ends:Break the tip of fresh flax bar by the feed hopper, pull the flax out from the hopper when feeding into the part at the base (close to the root) about 15cm in hand, and then turn the tip to strip the flax base. Feeding break and pulling the hemp out of the hopper are as follows
- 喂料时应适当掌握新鲜麻茎。手中握持的鲜麻茎应适合。
- 喂料时，将麻秆并排摊开，不要重叠。
- 喂料速度应使 苎麻去皮机 折断茎秆的亚麻骨和亚麻皮。
- 缓慢拉出。拉出速度要慢，尽可能保持一致，轻微减慢端部的刮擦速度。
结构 苎麻去皮机
According to the mechanical characteristics of ramie crop stalks,On the basis of the domestic and foreign research experience of 苎麻去皮机,By adopting the design scheme of transverse-feed mode, and the ramie stalks are fed continuously and uniformly transversely through the clamping device, the non-stop processing of ramie can be realized, which can greatly reduce the auxiliary working time and improve the efficiency of flax stripping.