4.5/5 - (5 votos)

El desarrollo de la trilladora de maíz.

According to statistics, since the 1980s, China has begun to purchase a batch of advanced Trillador de maíz from abroad. From the hand-operated Trillador de maíz to electric corn thresher, farmers gradually relieve from the heavy manual labor. In the end of 2014, there were more than 240 top agricultural machine manufacturers in China, and they sold more than 350,000 sets, corn sheller, annually. China’s agricultural development constantly tends to be mechanized, and the development and research of it has gradually been put on the agenda and has become the focus of China’s agricultural development.

Desde el nacimiento de la trilladora de maíz hasta su desarrollo y luego su popularización, es un signo de la modernización del desarrollo agrícola de China. Debido al vasto territorio chino, las condiciones climáticas y los requisitos agronómicos de las zonas montañosas y las condiciones económicas varían ampliamente. Por lo tanto, el uso de trilladora de maíz es muy extenso.

The annual harvest season is a busy time. Many farmers began buying maíz in advance, referring to its band, price and the technical parameter.
However, we can’t just look at the appearance to judge the quality of the machine, and the internal fittings are the most important. Thus, good thresher must be practical. Taizy Machinery specializes in agricultural equipment for more than 10 years, regarding designing machines, we consider both aesthetics and practicality. Our corn thresher is not only efficient but also designed with good looking.

Trillador de maízTrillador de maíz
As we all know, machine many occur some problems when operation. The biggest problem is that corn kernels can not be threshed fully. Today I will introduce some common problems and suggestions for you.

1. Algunos granos de maíz todavía están en las espigas.

reason:
(1). operator places too much corns into machine or the it is not uniform to put corn into machine.
(2). The threshing gap between the groove and the concave plate is too large.
(3). The rotation speed of the drum is too low;
(4). The corn is too moist.
Solución
(1). reduce the amount of feed, even feeding.
(2). Correctly adjust the threshing gap, and replace the worn parts in time.
(3). The pulley of the power maíz should match the pulley of the thresher. If the pulley is slippery, adjust the tensioner to tighten the belt.
(4). the straw too wet food should be properly ventilated, dried and then threshed.

2. La tasa de limpieza de Trillador de maíz es baja.

Razón:
(1). Un volumen de aire insuficiente provoca deslizamiento de la correa, haciendo que la velocidad del ventilador no alcance el índice.
(2). La tornillo de la polea del ventilador está flojo, formando una inercia y el ventilador no puede funcionar normalmente.
(3). Hay demasiadas pajas en el tambor de trilla.
Solución:
(1). Verifique la tensión de la correa del ventilador, si la polea tensora está demasiado floja, ajuste el tensor correctamente y apriete la polea hasta el grado adecuado; si el tornillo de fijación de la polea del ventilador está flojo, apriétalo.
(2). Reduzca la cantidad de maíz alimentado o ajuste la separación de alimentación.