Peanut harvester is a commonly used peanut harvesting machine. In order to ensure the quality of peanut harvesting and prevent unnecessary grain loss, peanut harvester should be inspected regularly in the process of operation. It should be adjusted according to the inspection results in time to ensure the yield and quality of peanut harvesting. The main points of inspection before using peanut harvester are introduced.
1.Before harvesting, it is necessary to organize manpower to repair, test run and cut the harvesting machinery, and to prepare various spare parts and fire protection equipment. At the same time, the whole harvest plan is made to determine the unit’s operating area and walking route, and to leveling the field ditch so as to minimize the idle time of the unit.
2.In order to facilitate the rotation of the unit and reduce the loss of grain, it is necessary to cut out the side road, return road and unloading trunk line of the plot before harvesting. The four corners of the plot should be cut into rounded corners or along the angular bisector to cut out a channel about 12 meters wide, so as to eliminate the missing cutting on the corner.
3.Make safety rules. Signals must be sent out before the unit starts; adjustments and maintenance must be carried out after the engine stops working. Pay attention to whether the alarm device of grain bin and straw box is out of order. It is forbidden to smoke on harvested plots and so on to ensure machine and personal safety during harvest
4.If unexhausted ears are found in the thrown stalk pile, the problems should be solved by increasing the rotational speed of the roller, reducing the threshing clearance and feeding quantity.
5.If more broken grains are found in the harvested grains, it is necessary to determine whether the broken grains are caused by the drum or by the stripper. If it is the reason for the drum, then most of the threshing clearance is too small or too high drum speed caused by, should be adjusted in time.
When peanut harvester is used for operation, in order to facilitate the rotation of the unit and reduce grain loss, the four corners of the plot’s side road, return road and plot should be cut into rounded corners or along the angular bisector to cut a passage about 12 meters wide, so as to eliminate the leakage on the corner and ensure the smooth harvesting operation. Conduct.