トウモロコシ脱穀機の開発
According to statistics, since the 1980s, China has begun to purchase a batch of advanced トウモロコシ脱粒機 from abroad. From the hand-operated トウモロコシ脱粒機 to electric corn thresher, farmers gradually relieve from the heavy manual labor. In the end of 2014, there were more than 240 top agricultural machine manufacturers in China, and they sold more than 350,000 sets, corn sheller, annually. China’s agricultural development constantly tends to be mechanized, and the development and research of it has gradually been put on the agenda and has become the focus of China’s agricultural development.
トウモロコシ脱穀機の誕生から発展、普及までの過程は、中国の農業近代化の象徴です。中国は広大な国土を持ち、山岳地帯の気候条件や農業条件、経済状況が大きく異なるため、トウモロコシ脱穀機の使用範囲は非常に広いです。
The annual harvest season is a busy time. Many farmers began buying トウモロコシ脱粒機 in advance, referring to its band, price and the technical parameter.
However, we can’t just look at the appearance to judge the quality of the machine, and the internal fittings are the most important. Thus, good thresher must be practical. Taizy Machinery specializes in agricultural equipment for more than 10 years, regarding designing machines, we consider both aesthetics and practicality. Our corn thresher is not only efficient but also designed with good looking.
As we all know, machine many occur some problems when operation. The biggest problem is that corn kernels can not be threshed fully. Today I will introduce some common problems and suggestions for you.
1. いくつかのトウモロコシの粒がまだコブに付いている
reason:
(1). operator places too much corns into machine or the it is not uniform to put corn into machine.
(2). The threshing gap between the groove and the concave plate is too large.
(3). The rotation speed of the drum is too low;
(4). The corn is too moist.
解決策
(1). reduce the amount of feed, even feeding.
(2). Correctly adjust the threshing gap, and replace the worn parts in time.
(3). The pulley of the power トウモロコシ脱粒機 should match the pulley of the thresher. If the pulley is slippery, adjust the tensioner to tighten the belt.
(4). the straw too wet food should be properly ventilated, dried and then threshed.
2. の清浄率 トウモロコシ脱粒機 は低い。
理由:
(1). 空気量不足によりベルトが滑り、ファンの速度が基準に達しない原因となる。
(2). ファンのプーリースクリューが緩んでいるためアイドリング状態になり、ファンを正常に使用できない。
(3). 脱穀ドラムに藁が多すぎる。
解決策:
(1). ファンのベルト張りを確認し、テンショナーが緩すぎる場合は適切に調整し、プーリーを適度に締める。ファンプーリーの固定ネジが緩んでいる場合は締め直す。
(2). 供給するトウモロコシの量を減らすか、供給ギャップを調整する。