A horizontal feed mixer is a kind of feed processing equipment that integrates crushing, stirring, and mixing. It is mostly used in animal breeding farms, such as cattle farms and sheep farms. Thus this machine can fully mix coarse materials, concentrated materials, minerals, vitamins, other additives, etc.

Estrutura do misturador de alimentação TMR

The feed mixer contains several parts. You can get more information from the below picture.

1. Sistema interno

The internal system of the horizontal feed mixer is mainly composed of three augers, one is the main auger, and the other upper two are auxiliary augers.

Depois de cortar o talo de milho usando um talo de milho colhendo machine, you can put the corn stalk into the horizontal feed mixer. During the mixing and cutting, the materials are simultaneously rotated and stirred from each position at both ends of the box to the middle of the mixer. Then the blade cuts and stirs the various fibrous forages and straws that pass through. To achieve the effect of pulverizing and mixing the total mixed ration feeding.

2. Sistema de descarga

Discharge gate control consists of a hydraulic cylinder, fixed support, linkage support, and a sliding discharge baffle. The discharging sliding baffle is installed on the reciprocating shaft of the hydraulic oil cylinder. Which can open the discharging or close the stopper. The outlet can be located on the left or right according to the user’s requirements.

3. Sistema de adição de feed

The machine adopts an advanced grass-feeding mechanism and a unique grass-feeding roller device. It owns automatic feeding, smooth grass-feeding, and high production efficiency.

4. Sistema de pesagem e medição

It is composed of four bridge-type load-bearing sensors and a load-bearing display controller. All system uses a 220V power source to send signals to the weighing display through a four-directional bridge weighing sensor. It aims to display gross weight, net weight, peak value, and net weight. The weighing and measuring system also has an overload alarm function.

Vídeo de trabalho

Parâmetro do misturador de alimentação

Temos três tipos de misturadores de ração, você pode obter informações detalhadas na folha abaixo.

Características do misturador de forragem:

1. The cutting blade of this product is made of high-quality high-alloy steel. And the product design is reasonable.

2. Este produto tem uma estrutura simples, por isso é fácil de operar.

3. The efficiency of the product is extremely high, the cutting speed and stirring speed are fast enough. Thus the machine can reduce the workload of people and reduce the investment of manpower and financial resources.

4. Besides, a forragem mixer is equipped with an automatic feeding port, so the amount of feeding is even. So the production efficiency is extremely high.

5. Além disso, nosso misturador de ração pode ser personalizado de acordo com as necessidades do cliente.

Vantagens do misturador de alimentação horizontal:

1. We can design a unique outlet according to the feed’s trajectory, it aims to achieve fast and uniform feeding efficiency.

2. A ração é misturada com alta uniformidade e ingestão energética balanceada. Portanto, é propício ao crescimento dos animais.

3. It has a simple structure, few wearing parts, and low maintenance cost.

4. Because the hydraulic transmission and mechanical transmission are of high reliability, they need short maintenance time.

5. The mixing chamber has less abrasion with a long service life.

6. A grama é cortada durante o processamento da ração, o que não danificará a fibra grossa.

7. This machine can process all kinds of roughages, and then directly add dozens of forages.